saxwerk.com

About saxwerk.com

This author has not yet filled in any details.
So far saxwerk.com has created 57 blog entries.

Saxwerk has signed an agreement and will deliver two complete sludge silos to Helsingborg, Öresundsverket, Sweden

2018-12-04T11:03:08+00:00November 30th, 2018|

Saxwerk has received an order for delivery of two complete sludge silos with discharge system and splash protection type Moving Bellow System. The delivery is to Helsingborg, Öresundsverket, Sweden. Delivery, assembly and commissioning will take place in early 2019. Material: Store and discharge of dry sludge from wastewater treatment plants. If you have questions about [...]

Saxwerk has signed an agreement with AB Gustaf Kähr

2018-11-20T16:04:47+00:00November 9th, 2018|

Saxwerk has been ordered to deliver three filter bottoms with discharge system to Kähr’s new pellet plant. Discharge is done with a sliding frame and discharge screw. The delivery will take place in the autumn of 2018 to AB Gustaf Kähr / Nybro (Sweden). The delivery includes complete manufacturing and assembly. The material to discharge [...]

3 Schubböden und 4 Rundsilos für OSB Greenfield Anlage in Russland

2018-11-13T15:49:30+00:00September 4th, 2018|

Siempelkamp beauftragt Saxwerk mit der Liefrung von drei Schubbodensystemen mit jeweils 800m³ Volumen zum Lagern und Austragen von Hackschnitzeln. Sowie vier Austragsysteme für Rundsilos bestehend aus Hydraulik Rotor und Gleitrahmen mit Austragschnecken. Die Austragsysteme sind für den Neubau einer Komplettanlage für die Produktion von OSB-Platten in Russland. Schubboden: Schüttgut: Hackschnitzel Austragsleistung: 135 m³/h Volumen: [...]

Recycling-Hackschnitzelsilo – Gleitrahmen und Dosierschnecken sowie ein Schneckenboden

2018-11-13T15:50:46+00:00September 3rd, 2018|

Saxwerk liefert an Dieffenbacher ein komplettes Silo für Hackschnitzel, mit Gleitrahmen und 4 Austragschnecken. Sowie einen Schneckenboden als Hallenlagerung. Silo Material : Recycling Altholz-Hackschnitzel Austragsleistung : 346 m³/h Durchmesser : 6000 mm Schneckenboden Material : Recycling Altholz-Hackschnitzel (Kategorie A1 und A2) Austragsleistung : 420 m3/h Abmessungen ca. : 4000 x 7000 mm [...]

Schubboden zum Austragen und Dosieren von Bioabfällen, Italien

2018-12-04T08:00:58+00:00August 30th, 2018|

Saxwerk wurde von mit der Lieferung von 2 Schubböden für die Lagerung und Dosierung von Bioabfall beauftragt.  Die Bunker sind jeweils mit 4 Verteilschnecken ausgerüstet, um eine optimale Befüllung zu gewährleisten. Aufstellungsort : Aprilia, Italien Material : Bioabfall Lagerkapazität : je 300 m³ Austragsleistung : 10 t/h Die Lieferung erfolgt im März 2019 If [...]

Saxwerk signs an agreement with Tekniska verken i Linköping AB, Sweden

2018-05-23T15:40:39+00:00May 23rd, 2018|

Download pdf (245 kb) Saxwerk has been ordered to deliver a new ash transportation system entirely in stainless steel to the CHP plant in Katrineholm. The delivery will take place in the summer of 2018. The delivery includes complete dismantling, manufacturing and assembly. The material is ash and slag. If you have questions about [...]

Saxwerk signs an agreement with AB Gustaf Kähr

2018-05-23T13:29:24+00:00May 8th, 2018|

Saxwerk has been ordered to deliver a raw material silo with discharge system to Kähr's new pellet plant. The Silo has a volume of 650 m3. Output is done with a sliding frame and discharge screw. The delivery will take place in the summer of 2018 to AB Gustaf Kähr / Nybro (Sweden). The delivery includes [...]

Saxwerk delivers fuel feeding system and wet ash conveyer

2018-03-09T15:54:03+00:00November 24th, 2017|

Dieffenbacher ordered a pushfloor system with vibration screen for crushed bark - production waste wood and a Saxwerk wet ash conveyor Type TKF N for their Energy Plant. If you have questions about this article, please contact Christoph Groffmann, phone: +49 1715292122.

Saxwerk has signed an agreement with Cortus for delivery of Fuel bin

2018-02-09T11:47:51+00:00November 10th, 2017|

Saxwerk has been ordered to supply fuel bin and associated conveyor line to Cortus's new plant in Höganäs, Sweden. The delivery is scheduled for March 2018. If you have questions about this article, please contact Magnus Landberg, phone: +46 8-500 666 93.

November 2nd, the 70 ton heavy hot water boiler is lifted in place at Gällö, Sweden

2017-11-28T11:50:25+00:00November 7th, 2017|

November 2nd, the 70 ton heavy hot water boiler is lifted in place at Gällö, Sweden. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95.

Dieffenbacher places an order with Saxwerk for two 300 m³ silos with discharge system

2018-02-26T13:47:10+00:00October 25th, 2017|

Saxwerk will deliver the engineering for two Silos to Dieffenbacher. As discharge system Dieffenbacher choose Saxwerk Slidingframe with Saxwerk discharge Screws. Material: Saw Dust / Sander Dust Discharge rate: 30 m³ Volume: 300 m³ The delivery will be in June 2018. If you have questions about this article, please contact Christoph Groffmann, phone: +49 [...]

Saxwerk has delivered a new Ash discharge system to General Electrics project in Boden, Sweden

2017-10-13T11:34:35+00:00October 13th, 2017|

Saxwerk has delivered complete system with drawings for silo bottom, sliding frame and the discharge screw. Read more If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95.

Saxwerk has signed an agreement with Härjeåns Energi about a systems for humidifying fly ash

2017-08-21T12:47:13+00:00August 21st, 2017|

Saxwerk has signed an agreement with Härjeåns Energi, Sweden, about a system for humidifying fly The system fills up a container system. If you have questions about this article, please contact Magnus Landberg, phone: +46 8-500 666 93.

Saxwerk sigend a contract for 4 pushfloors systems, Siempelkamp Germany

2017-06-29T10:24:50+00:00May 29th, 2017|

Saxwerk will be deliver the complete engineering of 4 Pushfloor Systems for wood chips. The delivery is scheduled for September 2017. If you have questions about this article, please contact Christoph Groffmann, phone: +49 1715292122.

4 Slidingframe discharge Systems for 1000 m³ Silos, EGGER Brilon, Deutschland

2017-06-29T10:19:28+00:00May 18th, 2017|

The delivery contains 4 Slidingframes for discharging wood and combust chips in 8,0 m diameter Silos. Delivery, assembly and commissioning in the existing Silos will be done in September 2017. If you have questions about this article, please contact Christoph Groffmann, phone: +49 1715292122.

Saxwerk recieved the order for 4 Pushfloors, Siempelkamp Germany

2017-06-29T10:15:04+00:00May 16th, 2017|

Saxwerk has signed the contract for the engineering and part delivery about 4 wood chips pushfloors with  600m³ volume each. The delivery is scheduled for September 2017. If you have questions about this article, please contact Christoph Groffmann, phone: +49 1715292122.

Saxwerk has signed an agreement and will deliver a complete dry sludge silo to Kungälv

2017-05-23T19:26:40+00:00April 21st, 2017|

Saxwerk has received an order from Dösebacka treatment plant to deliver a complete silo with discharge system including control cabinet and control box. Delivery, assembly and commissioning will take place in autumn 2017. The silon is equipped with Saxwerk original sliding frame. The material to store and discharge is dry sludge from treatment plant. [...]

Saxwerk has signed an agreement with Borås Energi & Miljö

2017-05-23T18:26:20+00:00March 31st, 2017|

Saxwerk has signed an agreement for delivery of a complete receiving silo and two unloading silos to Borås Energi & Miljö. Saxwerk has signed an agreement with Borås Energy & Miljö to supply a receiving silo with hydraulically operated hatch cover. Also two unloading silos with discharge system using sliding frame. Delivery, installation and commissioning [...]

Saxwerk has signed an agreement with SCA Gällö Timber to supply a 15 MW Power Plant for hot water to their wood dryers

2017-05-23T18:25:47+00:00February 6th, 2017|

The delivery is a turnkey contract with fuel handling, furnace, boiler and electrostatic precipitator. Delivery includes boiler house and outsourced pipe construction. The mechanical installation begins after the summer. Commissioning will take place in early 2018. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95. [...]

Saxwerk has signed an agreement to deliver a complete sludge silo to Biokraft, Skogn

2017-05-23T19:26:01+00:00January 30th, 2017|

Saxwerk has received orders for the delivery of a complete silo discharge system type slide frame to Biokraft Skogn in Norway. Delivery, installation and commissioning will take place in spring 2017. The material storing and outputting is industrial sludge. If you have questions about this article, please contact Olof Eriksson, phone: +46 8-500 666 [...]

Saxwerk has received an order to supply a complete dry sludge silo to Grödaland, Stavanger

2017-05-23T19:27:27+00:00January 23rd, 2017|

Saxwerk has received orders for the delivery of a complete silo discharge system with sliding frame to Grödaland, Norway. Delivery, installation and commissioning will take place in spring 2017. The material to store and dispense is dry sludge from a biomass gasification. If you have questions about this article, please contact Magnus Spjuth Adelörn, [...]

Saxwerk has signed a contract and will supply complete sludge silo to Aqua Svea AB

2017-05-23T19:28:25+00:00November 24th, 2016|

Saxwerk has received an order to deliver a complete silo discharge system including the control cabinet and control box to Häggesta treatment plants. Delivery, installation and commissioning will take place in June 2017. The silo is equipped with Saxwerk original sliding frame discharge. The material, to store and dispense from the treatment plant, is dry [...]

New feeder to Setra Trävaror AB, Heby sawmill

2017-05-23T19:30:40+00:00September 29th, 2016|

Saxwerk has received an order to replace and upgrade the Heby sawmill infeed system. The entire furnace (15 MW) input system will be replaced. The rust width is 5016 mm. If you have questions about this article, please contact Magnus Spjuth Adelörn, phone: +46 8-500 666 99.

Saxwerk has been trusted to deliver a Turn Key 8 MW hot water boiler to Hedlund Timber in Furudal

2017-05-23T19:33:13+00:00May 2nd, 2016|

The delivery is a turnkey contract with fuel handling, furnace, boiler and electrostatic precipitator. Saxwerks commitment also includes a complete boiler house, piping and electrical installation. The mechanical assembly is expected to begin in the fall of 2016. Commissioning takes place in the end of the year. If you have questions about this article, [...]

Saxwerk delivers complete sludge silo to Eskilstuna water treatment plant in Sweden

2017-05-23T19:52:42+00:00December 2nd, 2015|

Saxwerk has signed an order for delivery of 1 complete sludge silo with discharge system for Eskilstuna water treatment plant in Sweden. The delivery, assembling and start up will take place in Juni 2015. The silo is equipped with Saxwerk’s new ”splash protection device” moving bellow system. The sludge is from a water treatment plant. [...]

Saxwerk delivers complete sludge silo to Bekkelaget, Oslo in Norway

2017-05-23T19:49:26+00:00December 2nd, 2015|

Saxwerk has signed an order for delivery of 1 complete sludge silo with discharge system for Bekkelaget in Norway. The delivery, assembling and start up will take place in December 2015. The sludge is from a water treatment plant. If you have questions about this article, please contact Magnus Spjuth Adelörn, phone: +46 8-500 [...]

Saxwerk delivers intermediate storage pocket to Nybro Värmecentral, Sweden

2017-05-23T21:54:52+00:00February 27th, 2015|

Saxwerk has been entrusted to provide intermediate storage pocket for waste to Nybro Värmecentral's new cogeneration plant. If you have questions about this article, please contact Magnus Landberg, phone: +46 8-500 666 93.

Saxwerk delivers complete sludge silo to Margretelund Sewage Österåker, Sweden

2017-05-23T21:59:37+00:00November 3rd, 2014|

Saxwerk has signed an agreement with Roslagsvatten AB for delivery of a complete sludge silo with discharge and control systems. The delivery will take place in March 2015. In addition to installation and commissioning of new equipment, Saxwerk shall also dismantle the old facility. If you have questions about this article, please contact Magnus [...]

Saxwerk has received an order to supply material handling to Statkraft’s new energy plant in Moss

2017-05-23T22:02:52+00:00June 30th, 2014|

Saxwerk will deliver external management to the new energy facility in Moss, Årvollskogen. The delivery consists of two dosing bins with Saxwerk original push floor system and subsequent specially designed chain conveyor. Material is saw dust and bark. The delivery also includes an emergency bin. Delivery: 2015 Shipment is done via Hotab AB. If [...]

Saxwerk starts new company in Germany: Saxwerk GmbH

2017-05-23T22:11:00+00:00May 23rd, 2014|

Saxwerk has received an order from Dösebacka treatment plant to deliver a complete silo with discharge system including control cabinet and control box. Delivery, assembly and commissioning will take place in autumn 2017. The silon is equipped with Saxwerk original sliding frame. The material to store and discharge is dry sludge from treatment plant. [...]

Saxwerk replace existing bottom ash conveyor at Ljusdals Energy

2017-05-23T23:20:51+00:00April 20th, 2014|

Saxwerk will replace existing bottom ash conveyor at Ljusdals Energy. The old 10MW hot water boiler will be replaced by a wet ash conveyor. Saxwerk will also deliver a new semi-dry bottom ash conveyor to their new boiler. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95. [...]

Saxwerk signs agreement with Ljusdals Energy of the system to humidify filter ash

2017-05-23T23:28:18+00:00April 16th, 2014|

Saxwerk has signed an agreement on a system for humidifying filter ash from electrostatic precipitator. The system is redundant and serves two container system. If you have questions about this article, please contact Tomas Wendt, phone: +46 8-500 666 95.

Saxwerk will deliver two complete dosing bins with discharge, to Värmecentral in Sandefjord, Norway

2017-05-23T23:36:00+00:00February 28th, 2014|

The Archives: Saxwerk has received an orders to deliver two new dosing bins with discharge system to Värmecentral in Sandefjord, Norway The delivery will take place in 2014. The material to store and discharge is bark and sawdust. Shipment is done via Hotab AB. If you have questions about this article, please contact Magnus [...]

Saxwerk has signed a contract and will deliver two complete sludge receiver bins to Bergen Biogas

2017-05-23T23:51:14+00:00September 24th, 2013|

Saxwerk has received orders for delivery of two complete receiver bins with dispensing systems for delivery to Bergen Biogas plant in Norway. Delivery, installation and commissioning will take place in 2014. The material to store and dispense dry sewage sludge. If you have questions about this article, please contact Magnus Spjuth Adelörn, phone: +46 [...]

Saxwerk has signed a contract and will deliver sex complete sludge silos to Bergen

2017-05-23T23:45:54+00:00September 24th, 2013|

Saxwerk has received orders for the supply of six silos complete with dispensing systems for delivery in Bergen Norway. Delivery, installation and commissioning will take place during 2014 and 2015. The silos are provided with Saxwerks new "splash protection device" moving bellows system. The material to store and dispense dry sewage sludge. If you [...]

Saxwerk delivers reciving bins for waste for a new power plant in Västervik

2017-05-23T23:59:35+00:00June 27th, 2013|

Saxwerk has signed an order for delivery of the receiving bin, spill-resistant conveyor and magnetic separator for waste handling, to Västervik Energy & Environment. If you have questions about this article, please contact Magnus Landberg, phone: +46 8-500 666 93.

Saxwerk signs agreement with Andritz Feed & Biofuel A/S

2017-05-24T00:23:47+00:00January 14th, 2013|

Saxwerk has received an order to deliver a complete dry sawdust silo with discharge system. The silo has a volume of 500 m3. The order also consist explosion reliefs, level switches and platform. Output is done with a sliding frame and two conveyor discharge screws. Output goes to a mill and a transport system (output [...]

Saxwerk has signed an agreement with Krüger, Veolia for the delivery of four complete sludge silos

2017-05-24T00:29:10+00:00August 22nd, 2012|

Saxwerk has received orders for the supply of 2+2 complete silos with discharge systems, for delivery in Norway. The delivery will take place in 2013 and 2014. The delivery includes complete manufacturing, installation and commissioning. The material to store and dispense are: dry sewage sludge. If you have questions about this article, please contact [...]

Ljusdals Energy has given Saxwerk allocation decision to deliver external fuel management to their new hot water boiler

2017-05-24T00:34:30+00:00August 20th, 2012|

The delivery consists of two push floor bins 2x125 m3, which feeds a single chain conveyor. The capacity is 120 m3/h Through a disc screen for over size, a chain conveyor is fed which deliver the fuel to a distribution system consisting of three reversible screws. The screws feed either existing layer or two boiler [...]

Fuel Receiving Bin to Rindi Syd AB in Tomelilla

2017-05-24T00:38:21+00:00July 17th, 2012|

Saxwerk has received an order from Rindi Syd AB in Tomelilla, to deliver their new fuel-receiving bin. The volume in the bin is on a total of 385 m3, with an output capacity of 20 m3/h. The discharge system, type push floor, is designed to handle bark, wood chips, sawdust and willow. If you [...]

Saxwerk has signed an agreement with SCA Timber for the delivery of silo discharge for new silo for shavings

2017-05-24T00:41:37+00:00July 5th, 2012|

Saxwerk has received order to deliver a new discharge system and silo bottom to an existing silo. The silo has today problems with output and bridge formations. Deliveries will be scheduled for 2012. The delivery includes complete manufacturing and assembly. The material to store and dispense are: shavings from planing. If you have questions [...]

Saxwerk has signed an additional contract with Swedspan in Hultsfred

2017-05-24T00:52:07+00:00May 31st, 2012|

Saxwerk has signed an additional contract with SWEDSPAN in Hultsfred, for delivery of conveyors after their four knife mills. Saxwerk will deliver a 1600 mm wide scraper conveyor below the mills. After the scraper is a 20 m high band conveyor positioned to lift the material up to an existing conveyor. The machines are designed [...]

Alstom orders a discharge system from Saxwerk

2017-05-24T00:48:03+00:00May 31st, 2012|

Saxwerk have recieved an order from Alstom for the delivery of a discharge system of residual ash for Brista 2. The silo is a total of 350 m3 and handle waste products from the purification of flue gases from the new power heat plant. If you have questions about this article, please contact Tomas [...]

Saxwerk have completed the sludge silo to Sandviken sewage treatment plants

2017-05-24T00:44:58+00:00May 31st, 2012|

Saxwerk have now completed the installation of a 100 m3 sludge silo Sandvikens sewage treatment plant. If you have questions about this article, please contact Magnus Spjuth Adelörn, phone: +46 8-500 666 99.